China Hot selling Magnetic Motorized Head Pulley Drum Pulley for Belt Conveyor pulley assembly

Product Description

Product Introduction:
    The drum is the main component that transmits power. It is divided into 3 types according to their load-carrying capacity: light, medium and heavy.
     1. Light: Bearing aperture 80-100mm, the shaft and hub are single-width plate welded cylinder structure connected by single key.
     2. Medium: Bearing aperture 120-180mm, the shaft and hub are expansion sleeve connection.
     3. Heavy: Bearing aperture 200-220mm, the shaft and hub are expansion sleeve connection, and the drum body is cast-welded structure.

Product Description:
   Conveyor pulley stays at 2 ends of belt machine. The pulley can be divided into 2 categories: Driving pulley and averting pulley, driving pulley is the main part for transmitting the power and there are 2 kinds of pulley sets: Smooth surface and rubber surface, and rubber surface can be classified into smooth rubber surface, herringbone rubber surface and CHINAMFG rubber surface to meet different technical requirements. Averting pulley can be classified into smooth rubber surface and smooth steel surface. 
  
Product Features:

 

Technical Parameters:

Driving Pulley (rubber surface)

Belt Width 

Standard Diameter of Pulley 

500 mm

500mm

650 mm

500mm,630 mm

800 mm

500mm,630mm,800mm,1000mm,1250mm,1400 mm

1000 mm

630mm,800mm,1000mm,1250mm,1400 mm

1200 mm

630mm,800mm,1000mm,1250mm,1400 mm

1400 mm

630mm,800mm,1000mm,1250mm,1400 mm

1600 mm

630mm,800mm,1000mm,1250mm,1400 mm

1800 mm

630mm,800mm,1000mm,1250mm,1400 mm

2000 mm

800mm,1000mm,1250mm,1400 mm

2200 mm

1000mm,1250mm,1400 mm

2400 mm

1000mm,1250mm,1400 mm

 

Bend Pulley (smooth surface & rubber surface)

Belt Width 

Standard Diameter of Pulley (mm)

500 mm

250,315,400,500

650 mm

250,315,400,500,630 

800 mm

250,315,400,500,630,800,1000,1250

1000 mm

250,315,400,500,630,800,1000,1250,1400

1200 mm

250,315,400,500,630,800,1000,1250,1400

1400 mm

315,400,500,630,800,1000,1250,1400

1600 mm

400,500,630,800,1000,1250,1400

1800 mm

400,500,630,800,1000,1250,1400

2000 mm

500,630,800,1000,1250,1400

2200 mm

630,800,1000,1250,1400

2400 mm

800,1000,1250,1400

 Pulley Standard

Brand 

SPD 

Specification 

SPD-CP-0001

Certificate

ISO/BV/SGS

Standard

CEMA/JIS/DIN/Australia

Application

Coal mining industry, cement, steel, harbour etc.  

Place of Origin 

HangZhou City , ZheJiang  Province , China

Material Feature

Water, Wear, Dust resistance 

Supply capacity 

80pcs/month

Management system 

ISO 9001:2008,ISO 14001:2004,GB/T 28001-2001

Project Performance:

Main Equipment & Facilitys:

Packing & Delivery 

Our EPC Conveying System Project

Customer Visit & Exhibition

Our Company
    HangZhou Port Shipbuilding & Machinery Industry Co.,ltd, a wholly owned subsidiary of ZheJiang Port Equipment Group ,is a large comprehensive state-owned company combining industrial products research and manufacture, steel structure and equipment producing, general contracting service for industrial system integration and ships & equipment building and maintenance.
    As a member of the Standardization Administration of China/Technical Committee (SAC/TC331) , the company owns the production qualification for transport machinery, Grade-I Class III Production Qualification of steel general ships, Grade-I Production Qualification of steel fishing vessels; Grade-I Professional Contracting Qualification of steel structure, and kinds of Professional contracting qualifications for electrical and mechanical equipment installation, corrosion protection and insulation engineering, foundation, etc. The company also occupies Class B Design Qualification of steel fishery vessels and the Design & Construction Qualification of marine fishery platforms registered with the Ministry of Agriculture. The main business scope of RPIC covers ports, marine equipment, mining, electric power; cement, metallurgy; paper making and other various industries.
FAQ

 Q1:Can you send samples? A:Of course, we can provide customers with free samples but customer should pay the courier fee.
 Q2:What product information do I need to provide? A:Please kindly provide the grade, width, thickness, surface treatment requirement  and quantities you need to purchase.
Q3:What is your terms of payment ? A: 30% T/T in advance ,balance before shipment or 100% LC at sight.
 Q4.Do you provide customer made Products service? A: Yes,if you have your own design , we can produce according to your specification and drawing.
 Q5:How long does your delivery time take? A:In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances occur.
 Q6: How many countries you already exported to? A:We have exported to America, Canada, Brazil, Chile, Colombia, Thailand, Myanmar, Vietnam,  and other African countries.Our export experience is rich, we familiar with different market demands, can help customers avoid a lot of trouble.
 Q7:Can I go to your factory to visit? A:Of course, we welcome customers from all over the world to visit our factory.
 Q8:Does the product have quality inspection before loading? A:Of course, all our products are strictly tested for quality before packaging,  customers can appoint third parties to inspect the products before loading too.
 Q9:How to pack the products? A: Standard export sea-worthy packaging, the inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion and various climate changes during CHINAMFG transportation.    Q10:What is your working time? A:In general, our online service time is ZheJiang time: 8:00-22:00, after 22:00, we will reply to your inquiry in the coming working day. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: CVT Motor
Installation: Turning
Transport Package: Sea Freight Land Freight
Specification: CEMA Dia. 127mm*332mm*Bearing 6205
Customization:
Available

|

Customized Request

belt pulley

What is the importance of proper pulley alignment and tensioning in belt pulley systems?

Proper pulley alignment and tensioning are of utmost importance in belt pulley systems. They directly impact the efficiency, reliability, and longevity of the system. Here's a detailed explanation of the importance of proper pulley alignment and tensioning:

1. Power Transmission Efficiency: Proper pulley alignment and tensioning ensure efficient power transmission in belt pulley systems. Misaligned pulleys or incorrect belt tension can lead to slippage, which results in power loss. When the belts slip on the pulleys, the intended power transfer from the driving pulley to the driven pulley is compromised. By aligning the pulleys correctly and maintaining proper tension, the belts grip the pulleys securely, allowing for efficient power transmission and maximizing the system's overall efficiency.

2. Prevents Belt Wear and Damage: Improper pulley alignment and tensioning can cause excessive belt wear and damage. Misaligned pulleys can cause the belts to run at an angle, resulting in uneven wear on the belt's edges. This can lead to premature belt failure and the need for frequent belt replacements. Insufficient or excessive belt tension can also cause accelerated wear, as it puts additional strain on the belts. Proper alignment and tensioning help distribute the load evenly across the belts, minimizing wear and extending their lifespan.

3. Reduces Noise and Vibration: Correct pulley alignment and tensioning contribute to reducing noise and vibration in belt pulley systems. Misaligned pulleys can cause the belts to vibrate and generate noise during operation. Excessive belt tension can lead to increased vibration as well. These vibrations and noise not only affect the comfort of operators but can also impact the overall stability and performance of the system. Proper alignment and tensioning help minimize vibration and noise levels, creating a smoother and quieter operation.

4. Improves System Reliability: Proper pulley alignment and tensioning enhance the reliability of belt pulley systems. Misalignment or improper tension can lead to unexpected belt failures, system downtime, and costly repairs. When the belts slip or wear unevenly, it can cause disruptions in power transmission, resulting in reduced system performance or complete failure. Proper alignment and tensioning minimize the risk of belt-related issues, ensuring the system operates reliably and consistently.

5. Enhances Component Life: Correct pulley alignment and tensioning contribute to the longevity of system components. When the belts run smoothly and grip the pulleys properly, it reduces stress on the pulleys, bearings, and other mechanical parts. Misalignment or excessive tension can cause unnecessary strain on these components, leading to premature wear and failure. Proper alignment and tensioning help distribute the load evenly, minimizing stress and extending the life of system components.

6. Facilitates Easy Maintenance: Proper pulley alignment and tensioning make maintenance tasks easier. When pulleys are aligned correctly, it simplifies belt replacement, adjustment, or inspection procedures. Easy access to the belts and pulleys allows for efficient maintenance and reduces downtime during servicing. Additionally, proper tensioning ensures that belts can be adjusted or replaced without difficulty, improving overall serviceability of the system.

7. Optimizes System Performance: Ultimately, proper pulley alignment and tensioning optimize the performance of belt pulley systems. When the belts are aligned correctly and tensioned properly, the power transmission is efficient, wear is minimized, and vibrations are reduced. This results in reliable and consistent system operation, allowing the system to perform at its intended level of efficiency and productivity.

In summary, proper pulley alignment and tensioning are essential for efficient power transmission, prevention of belt wear and damage, reduction of noise and vibration, and improvement of system reliability. They enhance the lifespan of system components, facilitate maintenance tasks, and optimize the overall performance of belt pulley systems. By ensuring correct alignment and tension, operators can maximize the efficiency, reliability, and longevity of their belt pulley systems.

belt pulley

Can belt pulleys be used in both simple and complex mechanical systems?

Yes, belt pulleys can be used in both simple and complex mechanical systems. Belt pulleys are versatile components that are widely employed in various applications across different industries. They offer several advantages, such as reliable power transmission, flexibility in speed adjustment, and ease of installation. Here's a detailed explanation of how belt pulleys can be utilized in both simple and complex mechanical systems:

1. Simple Mechanical Systems: Belt pulleys are commonly used in simple mechanical systems where power needs to be transmitted between two shafts. These systems typically involve straightforward power transmission requirements and relatively uncomplicated machinery. Examples of simple mechanical systems where belt pulleys are utilized include small appliances like fans or blenders, exercise equipment, and simple conveyor systems. In these cases, belt pulleys provide an efficient and cost-effective solution for transmitting power from a motor or engine to drive a specific component or perform a specific task.

2. Complex Mechanical Systems: Belt pulleys are also extensively used in complex mechanical systems that involve multiple components, intricate power transmission requirements, and advanced machinery. These systems often require precise speed control, synchronization of multiple shafts, and the ability to transmit power over long distances. Examples of complex mechanical systems where belt pulleys are employed include large-scale manufacturing machinery, printing presses, industrial robots, and automotive engine systems. In these applications, belt pulleys are crucial in achieving accurate power transmission, maintaining synchronization, and enabling efficient operation of the complex machinery.

3. Speed Adjustment and Variable Power Transmission: Belt pulleys are particularly advantageous in systems that require speed adjustment or variable power transmission. By using pulleys of different sizes or adjusting the position of the belt on the pulleys, the speed and power transmission characteristics can be modified. This flexibility is beneficial in both simple and complex mechanical systems. For example, in a simple mechanical system like a drill press, a belt pulley system allows for speed adjustment to accommodate different drilling requirements. In a complex mechanical system like an assembly line, belt pulleys enable variable speed control to synchronize the movement of multiple components.

4. Adaptability and Customization: Belt pulleys can be easily adapted and customized to suit the specific requirements of both simple and complex mechanical systems. They can be designed and manufactured in various sizes, materials, and configurations to accommodate different shaft diameters, space restrictions, power transmission needs, and environmental conditions. This adaptability makes belt pulleys highly versatile components that can be integrated into diverse mechanical systems, regardless of their complexity.

5. Reliability and Maintenance: Belt pulleys offer reliable and efficient power transmission in both simple and complex mechanical systems. They have a long service life when properly installed and maintained, making them a dependable choice for various applications. Regular maintenance, such as checking for proper tension, alignment, and lubrication, ensures optimal performance and prolongs the lifespan of the belt pulleys in any mechanical system.

In summary, belt pulleys are suitable for use in both simple and complex mechanical systems. They provide efficient power transmission, speed adjustment capabilities, adaptability, and reliability. Whether it's in a small appliance or a sophisticated industrial machine, belt pulleys play a vital role in transmitting power and enabling the smooth operation of mechanical systems across a wide range of applications and industries.

belt pulley

What are the key components and design features of a belt pulley?

A belt pulley consists of several key components and incorporates specific design features to ensure efficient power transmission and reliable operation. Understanding these components and design features is essential for proper selection and utilization of belt pulleys in mechanical systems. Here's an overview of the key components and design features:

1. Pulley Body: The pulley body is the main structure of the belt pulley. It is typically a wheel-shaped component made of materials such as cast iron, steel, or aluminum. The pulley body provides the necessary strength and rigidity to support the belt and transmit rotational motion.

2. Grooved Rim: The rim of the pulley body features a series of grooves or channels. These grooves accommodate the belt or rope, ensuring a secure engagement between the pulley and the transmission element. The groove profile can vary depending on the type of belt or rope being used.

3. Hub or Bore: The hub or bore is the central opening in the pulley body. It allows the pulley to be mounted and secured onto the shaft. The hub may have keyways, splines, or other features to ensure proper alignment and torque transfer between the pulley and the shaft.

4. Flanges: Flanges are raised edges or rims located on the sides of the pulley body, adjacent to the grooved rim. Flanges help guide and prevent the belt from slipping off the pulley during operation. They provide additional support and stability to the belt, ensuring reliable power transmission.

5. Tensioning Mechanism: Some belt pulley designs incorporate a tensioning mechanism. This mechanism allows for adjusting the tension in the belt to ensure proper engagement and prevent slippage. Tensioning mechanisms can include adjustable pulley halves, movable pulley arms, or other mechanisms that enable easy tension adjustment.

6. Idler Pulleys: In certain belt-driven systems, idler pulleys are used in conjunction with the main driving and driven pulleys. Idler pulleys are additional pulleys that do not transmit power but help guide and redirect the belt. They maintain the appropriate tension in the belt, improve belt wrap around the pulleys, and assist in achieving the desired belt path.

7. Surface Finish: The surface finish of a belt pulley is important for reducing friction and wear between the pulley and the belt. Smooth and properly finished surfaces minimize belt slippage and improve power transmission efficiency. The surface finish can be achieved through machining, grinding, or other methods depending on the material and application requirements.

8. Balancing: Balancing is a critical aspect of belt pulley design, especially for high-speed applications. Proper balancing ensures that the pulley rotates smoothly without causing excessive vibrations or premature wear. Unbalanced pulleys can lead to reduced system performance, increased noise, and potential damage to the pulley or other components.

9. Material Selection: The choice of material for a belt pulley depends on factors such as the application requirements, load capacity, operating conditions, and cost considerations. Common materials used for pulleys include cast iron, steel, aluminum, and composite materials. Each material offers specific advantages in terms of strength, durability, corrosion resistance, and weight.

In summary, a belt pulley consists of components such as the pulley body, grooved rim, hub or bore, flanges, tensioning mechanisms, and may include idler pulleys. Design features like surface finish, balancing, and material selection are crucial for optimal performance and longevity of the pulley. Understanding these key components and design features allows for the appropriate selection, installation, and maintenance of belt pulleys in mechanical systems.

China Hot selling Magnetic Motorized Head Pulley Drum Pulley for Belt Conveyor   pulley assembly	China Hot selling Magnetic Motorized Head Pulley Drum Pulley for Belt Conveyor   pulley assembly
editor by CX